Protocol Ritual
Cold PodMatPrep PadsHome KitTotemBlog

Blog

Straight answers for clinic and telehealth owners: what goes in a patient kit, how custom branding works, what keeps refrigerated medication at 2–8 °C, and what it takes to source it all.

A slate silicone reconstitution mat lifted at one corner
November 1, 2026

What does FDA 21 CFR 177.2600 mean for a silicone mat?

21 CFR 177.2600 is the US FDA rule for rubber articles intended for repeated food contact, silicone included. It limits how much material can be…

Sage, slate and black silicone reconstitution mats laid side by side
November 1, 2026

LFGB vs FDA: what's the difference for a silicone mat?

The US FDA rule (21 CFR 177.2600) limits how much can be extracted from silicone by solvent and water. Germany's LFGB, with the BfR recommendation…

A slate platinum-cured silicone mat folded into a standing loop
November 1, 2026

Platinum-cured vs peroxide-cured silicone: does it matter for a mat?

Silicone rubber is cured with peroxide or with platinum. Platinum curing leaves no peroxide by-products, and it shows in the BfR test for volatile…

A large prep pad wiping a black silicone mat
November 1, 2026

How do you clean a silicone reconstitution mat?

Wipe it with a large 70% isopropyl alcohol pad before the dose and again after, let it air-dry, then fold it away. Here is the routine, what to do…

Sage, slate and black reconstitution mats side by side on a counter
November 1, 2026

Sage, slate or black: how should a clinic choose a mat color?

Our reconstitution mat comes in sage (Pantone 15-0318 TCX), slate (16-5804 TCX) and black (19-0303 TCX), each with the clinic's mark printed on it.…

Custom-branded prep pads, a travel case and a reconstitution mat, all carrying the same mark
October 31, 2026

Can a clinic put its own brand on injection supplies?

Yes. Travel cases, reconstitution mats, prep pads and cold-chain cases can all carry a clinic's own mark. Here is what each surface can take, what a…

Prep pads, a box of 90, and a slate reconstitution mat with a vial and syringe
October 31, 2026

What should be in a patient injection kit a clinic hands out?

A patient injection kit should give every dose a clean surface, the right pad for the job, a case cut to the vials the clinic dispenses, and, for…

A finished set of custom-branded clinic supplies: case, cooler, pads and mat
October 31, 2026

What does it take to source custom-branded clinic supplies from China?

Sourcing branded patient kits yourself means finding six factories, chasing samples, proofing logos, paying factories upfront, booking freight,…

The Cold Pod travel case held closed, lid readout at 4.1 °C
October 31, 2026

Gel pack or phase-change material: which keeps refrigerated medication at 2–8 °C?

A frozen gel pack sits at 0 °C, below the 2–8 °C range most refrigerated medication is labeled for. A +5 °C phase-change material sits inside it. The…

A slate reconstitution mat with a vial and an insulin syringe on it
October 31, 2026

What is a reconstitution mat, and why would a clinic give one to every patient?

A reconstitution mat is a 3 mm silicone sheet that gives a patient one clean, flat place to reconstitute and draw up a dose. Here is what to look for…

An open box of 90 custom-branded prep pads with pads laid on a sage mat
October 31, 2026

Can alcohol prep pads carry a clinic's name?

Yes. Individually sealed 70% isopropyl alcohol prep pads can be printed with a clinic's name on every pouch and boxed in the clinic's mark. Here is…

A finished box of custom-branded prep pads, open, with pads on the mat
October 31, 2026

How does a custom-branded product run work, from proof to delivery?

A custom run has six stages: tell the supplier what you dispense, approve proofs for every surface, hold a physical sample, production, freight and…

A phone showing a temperature log at 4.2 °C, in range, next to the Bluetooth logger from a Cold Pod
October 31, 2026

How should patients travel with refrigerated medication?

Refrigerated medication is labeled for 2–8 °C. For a day trip, a case charged with +5 °C phase-change material holds the range with nothing to plug…